pH 4.5-10 Test Strip, 3 pad
- Remove one pH 4.5-10 test strip by holding between your index finger and thumb. Do not touch the test pad with your finger.
- Dip the test strip into the solution to be tested so that all three pads are completely immersed.
- Remove the test strip, and shake off any excess liquid.
- Compare to the color chart within 30 seconds. Do not allow the test strip to dry before reading against the color chart.
NOTE: When comparing to the color chart, the closest match of all three is the correct value. Only one or two of the three pads will change for any given acid, and they will read differently in varying lighting conditions (incandescent, fluorescent, sunlight).
Disclaimer: Precision Laboratories products are not approved for use as medical devices. Products and product information is for informational purposes only and not intended for use to diagnose, treat, cure or prevent any medical condition. Consult a medical doctor when needed.
CZ4510-3/S; CZ4510-3SP; CZ4510-3; PH4510; PH4510-3; PH4510-3-1B-50; PH4510-3-1V-100
PH4510-3-1V-100 (1 vial, 100 strips/vial)
PH4510-3-1B-50 (1 bag, 50 strips/bag)
PH4510-3-1B-100 (1 bag, 100 strips/bag)
100 strips, 50 strips
1.125″ (D) x 3.375″ (H) [29mm (D) x 86mm (H)]
3″ (W) x 4″ (H) [76mm (W) x 102mm (H)] (Clear)
2.5″ (L) x .1875″ (W) [64mm (L) x 5mm (W)]
0.02 lbs [9.5 g] (50-strip bag), 0.09 lbs [42.5 g] (100-strip vial)
Stored in a flip-top vial with built-in desiccant liner.
3 Years Minimum
Customizable water-resistant label