Chlorine Test Paper 0-200ppm 100strips

Chlorine Test Paper

When using bleach as a cleaner, it must be diluted before use, and it will work best in the pH range of 5-7.

1. Use dry fingers to remove a chlorine test paper strip from the vial.
2. Dip the test strip into the solution to be tested, and do not agitate.
3. Remove and compare to the color chart immediately.

NOTE: The strip will darken over time, so it is best to compare to the color chart as directed. In addition, if two strips are stuck together, the color will be darker. Lastly, if you lay the strip against the vial when comparing to the color chart, it will also darken the color. The color chart was created by holding a strip in the air next to the vial.

NOTE: If you believe that the solution contains chlorine, but the test the strip is white after dipping, you may be seeing what is referred to as the “bleaching out effect.” At high concentrations of bleach, the available chlorine will overwhelm the indicators used in the strips. If this happens, instead of developing a purple color the strip will very quickly turn to white. The best indicator of this effect is the presence of a thin blue line on the strip separating the wet portion from the dry portion of the strip.